HANNspree Flat Panel Television JT01 32E2 User Manual

Quick Start Guide  
JT01-32E2 32" Liquid Crystal Display TV  
This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.  
Front View  
Rear View  
1
2
3
1
2
3
4
5
6
4
14 13  
12 11  
10  
9
8
7
6
5
7
8
9
1. Volume down button  
2. Volume up button  
3. OSD Menu button  
4. Channel down button  
5. Channel up button  
6. Enter button  
7. Power button  
8. Infrared receiver  
9. Power LED indicator  
1. Audio Output for AV, S-Video or YPbPr  
components (L/R)  
2. Audio Input for AV, S-Video or YPbPr/  
HDMI-DVI components (L/R)  
3. Audio Input for VGA  
4. RF Antenna / Cable TV Input  
5. SCART2 / SCART2-SV Input  
6. SCART1 Input  
8. S-Video Input  
9. YPbPr/ HD Component Video Input  
10. VGA (15 pin) Signal Input from Computer  
11. HDMI2 Input Terminal (19 pin)  
12. HDMI1 Input Terminal (19 pin)  
13. AC Power Input  
14. AC Power Switch  
7. Composite Video input  
Making Connections  
Connecting to Antenna/Cable TV  
Getting Started  
Selecting Input Source  
1. Connect one end of the UHF/VHF (Antenna)  
or CATV cable to the TV IN jack (UHF/VHF  
IN jack) on the back of the TV.  
TV  
YPbPr  
AV  
1. Make sure your TV is turned on and a device  
such as a DVD player is connected.  
2. Press the SOURCE button on the remote  
HDMI2  
SVIDEO  
control and use the / button to select  
the required input source between PC, HDMI1,  
HDMI2, TV, YPbPr, AV, SVIDEO, SCART1,  
SCART2, and SCART2-SV.  
2. Connect the other end of the UHF/VHF  
(Antenna) or the CATV cable to the Antenna  
or CATV socket.  
HDMI1  
PC  
SCART1  
SCART2  
SCART2-SV  
Connecting to VCR, VCD or DVD Player  
3. Press ENTER to confirm your selection.  
The illustrations below show you how to connect your TV to a VCR, VCD or a DVD player.  
With RCA AV cable  
With S-Video cable  
Auto Channel Scan  
Follow the instructions below to automatically preset the channels for your TV  
before watching it for the first time.  
1. Press the "MENU" button on your remote control or the control panel.  
2. Use the / button to select Channel Menu.  
3. Press the / button to select country.  
4. Press the "ENTER" button to start Auto Scan.  
With YPbPr cable  
With SCART1  
Note: After performing Auto Scan, you need not do it again when turning  
on your TV next time.  
Auto Scan  
C h a n n e l  
A u t o S c a n  
M a n u a l S t o r e  
N a m e  
U K  
Connecting the Power Cord  
1. Plug the power connector into the AC-IN  
input jack on the rear cover of the TV-set.  
2. Insert the three-pronged plug at the other  
end of the power cord into a power outlet.  
3. Turn the main power switch on to supply  
power to the TV.  
OSD  
S e l e c t  
MENU E x i t  
JT2002310661P  
© Copyright 2007 Hannspree, Inc. All rights reserved.  
 

Graco High Chair PD223741A User Manual
Graco Inc Paint Sprayer 233700 User Manual
Grizzly Meat Grinder H6247 User Manual
Grizzly Router T10157 User Manual
Haier Flat Panel Television 15HL25S User Manual
Harbor Freight Tools Grinder 36572 User Manual
Heat Controller Air Conditioner REG 183A User Manual
Heatcraft Refrigeration Products Air Compressor 25006801 User Manual
Hotpoint Dishwasher HDA 897 User Manual
Hubbell Switch LXi 1300 User Manual